characteristic
Chemical Boiler Heater Suitable for installation in chemical boiling tanks by using a hook attached to the heater body hook on the side of the tank

Recommendations for use
– Choose the type of pipe to suit the application.
– Do not use a wattage heater. and the operating temperature exceeds what the store recommends
– Be careful not to let the water dry. Or do not let the chemical liquid level drop below the heater’s heat level, it will cause the heater to short out and fail immediately.
– Should wash the liquid stains on the heater pipe surface every 3 months to prolong the service life and make Save on electricity bills.
– Install the heater should be at the lowest level of the tank or well. And there is a thermostat to control the temperature.
– There should be a float switch to measure the chemical liquid level. to prevent the chemical liquid level in the tank from decreasing and send an alarm in case the liquid is dry to prevent damage to the heater